Vertical Tap/Angle Bracket The Vertical Tap Angle Bracket converts compact diamond to a vertical orientation for use as a termi.. Product #: Vertical Tap/Angle Bracket

Vertical Tap/Angle Bracket


The Vertical Tap Angle Bracket converts compact diamond to a vertical orientation for use as a termination point for lateral taps and turning angles for the phase conductors of the aerial spacer cable system. The Vertical Tap/Angle Bracket provides a cost-effective solution compared to a standard crossarm construction. The bracket is ideally suited to be used with INSULIGN® Tie Top Insulators with Coated Ties or INSULIGN Vise Top Polymer Insulators in conjunction with the DIP-10 Insulator plate when angles require double pin construction. The brackets are interchangeable with other manufacturers' spacer cable systems.


  • Lateral termination point for convenient circuit tapping

  • Cost-effective alternative to crossarm terminations

  • Vertical orientation to facilitate heavy line angles and simplified taps

  • Pole mounting is achieved by using either 5/8" or 3/4" double arming or through bolts (not included) 

  • Provisional ground lug hole

Catalog Number System Voltage Minimum Yield Load Weight Material
V1 V2 V3 lb
lb
ABV-35 46 kV and below 1000 1600 1100 38 Galvanized Steel

 NOTE: Hot dip galvanized per ASTMA153 or A123 (latest version)