Transformer Tap Bracket The Transformer Tap Bracket provides increased phase spacing for the purpose of energizing electrica.. Product #: Transformer Tap Bracket

Transformer Tap Bracket


The Transformer Tap Bracket provides increased phase spacing for the purpose of energizing electrical equipment on the distribution system. It can be used in tangent as well as angle applications. Angle applications are limited to 60 degrees. The bracket is ideally suited to be used with INSULIGN® Tie Top Insulators with Coated Ties or INSULIGN Vise Top Polymer Insulators. It is used in conjunction with the DIP-10 Insulator plate when angles require double pin construction. The brackets are interchangeable with other manufacturers' spacer cable systems. 


  • Maintains the spacer cable system's configuration through angle poles

  • Provides increased spacing between phases to facilitate electrical equipment tapping

  • Utilizes a standard 8" mounting spacing for compatibility on predrilled poles

  • Pole mounting is achieved by using either 5/8" or 3/4" double arming or through bolts (not included) 

  • Provisional ground lug hole

Product Information

Transformer Tap Bracket - Catalog Pages

 

Catalog Number System Voltage Minimum Yield Load Weight Material
V1 V2 lb
lb
BTC-35 46 kV and below 1000 1400 38 Galvanized Steel

 NOTE: Hot dip galvanized per ASTMA153 or A123 (latest version)