Tangent Bracket
Tangent Brackets are designed to support a spacer cable system’s messenger. They are used in tangent applications and can accommodate line angles of up to 6 degrees. The brackets are interchangeable with other manufacturers’ spacer cable systems. Proper utility grade hardware should be used. All Tangent Brackets are supplied with the MC-2 Messenger Clamp to accommodate messengers from 5/16" to 3/4" in diameter.
-
Pole mounting is achieved by using either 5/8” or 3/4” double arming or through bolts (not included)
-
Allows for back-to-back double circuit construction
-
Accepts standard short shank insulator pin (up to 3/4” shank diameter), insulator for single phase spacer
cable angle construction and armless tree wire construction
-
Ductile iron construction for strength and durability
-
Works in conjunction with roll-by installation equipment and will allow continuous, uninterrupted pulling of cable past tangent structures
| Catalog Number | System Voltage | Dimensions | Dimensions | Messenger Range |
Messenger Range |
Maximum Ultimate Load |
| Length | Bolt Spacing | Minimum (in) |
Maximum (in) |
lb | ||
| LTB-14C | 15 kV | 14 | 8 | 0.31 | 0.75 | 3200 |
| LTB-24C | 46 kV | 24 | 8 | 0.31 | 0.75 | 6000 |
