Angle E Bracket - Messenger Mounting Under 60-Degrees
The Angle E Bracket with Messenger Mounting can be used on structures where line angles do not exceed 60 degrees. The bracket provides the same benefits as the Angle Bracket for Pole Mounted Messengers but has an integrated point for attaching the MAC series messenger clamps reducing the overall cost of construction. The bracket is ideally suited to be used with INSULIGN® Tie Top Insulators with Coated Ties or INSULIGN Vise Top Insulators. The brackets are interchangeable with other manufacturers' spacer cable system.
-
Maintains the spacer cable system's configuration through angle poles and provides electrical shielding due to location of messenger clamp
-
Pole mounting is achieved by using 5/8" or 3/4" double arming or through bolts (not included)
-
The upper arm accepts the MAC-6201 directly or the MAC-6301 by using the U-563 U-bolt
-
Provisional ground lug hole
-
Cost-effective alternative to crossarm transitions
| Catalog Number | System Voltage | Minimum Yield Load | Weight | Material | ||
| V1 | V2 | V3 | lb | |||
| lb | ||||||
| ABE-15 | 15 kV & below | 2500 | 800 | 1000 | 39 | Galvanized Steel |
