FIBERLIGN® Figure 8 Drop Cable Dead-End
The FIBERLIGN Figure 8 Drop Cable Dead-End offers high-strength in a lightweight package. Simple to install, the dead-end is applied on the messenger component of the Figure 8 cable after separating the fiber component at the web.
-
Designs available for high-adherence jacketed messenger or bare messenger applications
-
Offered in galvanized steel or stainless steel to match the messenger strand
-
Dead-end loop will fit a minimum diameter of 1" (25.4 mm) and a maximum of 1-5/8" (41.3 mm) to allow the dead-end to fi t over common pole line hardware fittings
-
Thimble option for proper loop support when attaching the dead-end to hooks or other types of fittings with diameters less than 1"
-
Formed wire design allows messenger wires to pass through the dead-end without having to be cut to reduce the number of ground connections required
Product Information
FIBERLIGN Figure 8 Drop Cable Dead-End
Catalog Number |
Cable Information2 L x W3 |
Color Code | Length | ||||
without Thimble |
with |
in | mm | Manufacturer | in | mm | |
200811190 | 200811190T |
0.300 x 0.170 |
7.6 x 4.3 | Prussian | Red | 8 | 0.20 |
6999116194 | 699911619T4 | 0.380 x 0.160 | 9.6 x 4.1 | Corning | Yellow | 13 | 0.33 |
1 Includes a 1/2" Standard Thimble (Catalog Number: 00065474). 2 Contact PLP for cable applications not shown 3 Length x Width of the Figure 8 Drop Cable cross-section 4 Apply over jacket |