FIBERLIGN® Multi-Drop Bracket - Side Mount
The FIBERLIGN Multi-Drop Bracket – Side Mount is designed to reduce attachment costs at the pole by effectively minimizing the pole space and hardware required to attach multiple cables at the pole. This bracket allows multiple FIBERLIGN Extended Span and ADSS Drop cable dead-ends to be supported on each side that are tangent to the pole, allowing for better transitioning of drop cable turning angles and distribution from the pole to the premise. A single bolt or band is used to attach the bracket to the pole or structure to save on additional pole attachment fees.
Reduces the pole space and hardware required to connect multiple drop cable spans to the pole or structure
Utilized for re-direction of drop cables at the pole
Utilized for short or long span installations of multiple drop cables
Compatible with formed wire dead-ends and drop clamps (p-clamps)
Attaches to the pole or structure with a 5/8" through bolt, 5/8" double arming bolt, or 1-1/4" wide banding
Made of ductile iron that is galvanized per ASTM A-153
FIBERLIGN Multi-Drop Bracket (Side Mount) - Catalog Pages
FIBERLIGN Side Mount Multi-Drop Bracket
• Select the catalog number from the table below when attaching multiple drop cable spans to a pole or structure with drop clamps (p-clamps), formed wire dead-ends with a 3/4" (19 mm) cable loop diameter, or formed wire dead-ends with an appropriate open style thimble.
|MDB208||Side Mount Multi-Drop Bracket|