FIBERLIGN® Lite Tension Dead-End
The FIBERLIGN Lite Tension Dead-End is a dielectric dead-end designed to terminate short-span, low-tension ADSS fiber optic cables in low-voltage environments. Its single-layer component design offers an economical solution for very light loads. The product effectively transfers the low axial load on the cable at the end of the dead-end legs to low uniform radial compression near the dead-end loop.
-
Small diameter wires that comprise each dead-end are a mixture of aluminum and aluminum-clad steel that provide superior fatigue strength to ensure long-term performance
-
Dead-end legs have a pliable latex coating and flared rod ends to avoid scoring or abrasion to the cable jacket during and after installation
-
Dead-end loop will fit a minimum cable diameter of 1-1/2" (38.1 mm) and a maximum of 2-1/4" (57.1 mm)
-
Designed to fit over common guy wire dead-end pole fittings • Extended dead-end loop reduces the need for an extension link • Optimized compact length that allows for fast and easy installation
-
Can be used on most brands of ADSS cable that have low strengths and “standard” jackets
Catalog Number | Cable Diameter Range1 | Color Code | Length | |||||
Dead-End Only | Dead-End with Thimble Eye2 | Dead-End with Thimble Clevis & Eye Nut3 | Dead-End with Thimble Clevis & Extension Link4 | in | mm | in | mm | |
2875001 | 2875001TE | 2875001C1N | 2875001C1E1 | 0.375 - 0.414 | 9.5 - 10.5 | Red | 28 | 0.71 |
2875002 | 2875002TE | 2875002C1N | 2875002C1E1 | 0.415 - 0.459 | 10.6 - 11.6 | Orange | 31 | 0.79 |
2875003 | 2875003TE | 2875003C1N | 2875003C1E1 | 0.460 - 0.505 | 11.7 - 12.8 | Green | 33 | 0.84 |
2875004 | 2875004TE | 2875004C1N | 2875004C1E1 | 0.506 - 0.557 | 12.9 - 14.1 | Pink | 37 | 0.94 |
2875005 | 2875005TE | 2875005C1N | 2875005C1E1 | 0.558 - 0.615 | 14.2 - 15.6 | Yellow | 42 | 1.07 |
2875006 | 2875006TE | 2875006C1N | 2875006C1E1 | 0.616 - 0.680 | 15.7 - 17.3 | Blue | 45 | 1.14 |
2875007 | 2875007TE | 2875007C1N | 2875007C1E1 | 0.681 - 0.750 | 17.4 - 19.6 | Brown | 49 | 1.24 |
1 Contact PLP for cable applications not shown | ||||||||
2 Includes a Thimble Eye (Catalog Number: TE-5). Mount the Thimble Eye with a 5/8" (16 mm) bolt and nut. | ||||||||
3 Includes a Thimble Clevis (Catalog Number: TC-FO) and an 5/8" Eye Nut (Catalog Number: EN-5). | ||||||||
4 Includes a Thimble Clevis (Catalog Number: TC-FO) and an Extension Link with Eye Nut (Catalog Number: 71002366). |