FIBERLIGN® Dielectric Support
The FIBERLIGN Dielectric Support (FDS) system is designed to gently but firmly support ADSS cable. It is intended for tangent support installations on lines that feature relatively low voltages, short spans, and modest mechanical loads.
-
Mounts to pole with a 5/8" through bolt or a banding system with a mounting bracket
-
Supports span lengths up to 600 ft (183 m) NESC Heavy for cables with diameters less than 1.0" and 300 ft (91 m) NESC Heavy for cables with diameters greater than 1.0"
-
Supports line angles up to 20 degrees
-
Housing is made from a high-strength dielectric urethane material
-
Inserts are made from a soft, pliable dielectric material that gently grips and cushions the cable
-
Highly abrasive-resistant surface of the housing allows it to be used as a stringing traveler at the structure
FIBERLIGN Dielectric Support
• Each Dielectric Support includes one complete insert (two halves) for the stated cable range
• Additional inserts are sold as Insert Halves - see table
| Catalog Number | Cable Diameter Range | ||
| Support (includes insert) | Support with Banding Bracket Kit | in | mm |
| 44002144 | 44002144B1 | 0.275 - 0.325 | 7.0 - 8.3 |
| 44000691 | 44000691B1 | 0.326 - 0.375 | 8.4 - 9.5 |
| 44009998 | 44009998B1 | 0.376 - 0.425 | 9.6 - 10.8 |
| 44009949 | 44009949B1 | 0.426 - 0.475 | 10.9 - 12.1 |
| 44009952 | 44009952B1 | 0.476 - 0.525 | 12.2 - 13.3 |
| 44009823 | 44009823B1 | 0.526 - 0.575 | 13.4 - 14.6 |
| 44009798 | 44009798B1 | 0.576 - 0.625 | 14.7 - 15.9 |
| 44009776 | 44009776B1 | 0.626 - 0.675 | 16.0 - 17.1 |
| 44009799 | 44009799B1 | 0.676 - 0.750 | 17.2 - 19.1 |
| 44009878 | 44009878B1 | 0.751 - 0.825 | 19.2 - 21.0 |
| 44009963 | 44009963B1 | 0.826 - 0.900 | 21.1 - 22.9 |
| 44002213 | 44002213B1 | 0.901 - 0.950 | 23.0 - 24.1 |
| 44003915 | 44003915B1 | 0.951 - 1.000 | 24.2 - 25.4 |
| 440010296 | 440010296B1 | 1.0001 - 1.050 | 25.5 - 26.6 |
| 4800000 | Housing | ||
| 710010577 | Banding Hardware Only | ||
FIBERLIGN Dielectric Support Insert Halves
• Two Insert Halves are required for each support
| Catalog Number | Cable Diameter Range | |
| in | mm | |
| 00070061 | 0.275 - 0.325 | 7.0 - 8.3 |
| 00070052 | 0.326 - 0.375 | 8.4 - 9.5 |
| 00070056 | 0.376 - 0.425 | 9.6 - 10.8 |
| 00070059 | 0.426 - 0.475 | 10.9 - 12.1 |
| 00070107 | 0.476 - 0.525 | 12.2 - 13.3 |
| 00070088 | 0.526 - 0.575 | 13.4 - 14.6 |
| 00070108 | 0.576 - 0.625 | 14.7 - 15.9 |
| 00070109 | 0.626 - 0.675 | 16.0 - 17.1 |
| 00070110 | 0.676 - 0.750 | 17.2 - 19.1 |
| 00070111 | 0.751 - 0.825 | 19.2 - 21.0 |
| 00070112 | 0.826 - 0.900 | 21.1 - 22.9 |
| 00070113 | 0.901 - 0.950 | 23.0 - 24.1 |
| 00070147 | 0.951 - 1.000 | 24.2 - 25.4 |
| 00070154 | 1.0001 - 1.050 | 25.5 - 26.6 |
