FIBERLIGN® Multi-Drop Bracket - Direct Mount

The FIBERLIGN Multi-Drop Bracket – Direct Mount is designed to reduce attachment costs at the pole by effectively minimizing the pole space and hardware required to attach multiple cables at the pole. This bracket allows multiple FIBERLIGN Extended Span and ADSS Drop cable dead-ends to be supported off of one side of the pole. A single bolt or band is used to attach the bracket to the pole or structure to save on additional pole attachment fees.

  • Reduces the pole space and hardware required to connect multiple drop cable spans to the structure

  • Can be mounted vertically or horizontally when bolted to the structure

  • Utilized for short or long span installations of multiple drop cables

  • Compatible with formed wire dead-ends and drop clamps (p-clamps)

  • Attaches to the pole or structure with a 5/8" through bolt, 5/8" double arming bolt, or 1-1/4" wide banding

  • Made of ductile iron that is galvanized per ASTM A-153

     

Product Information

FIBERLIGN Multi-Drop Bracket (Direct Mount) - Catalog Pages

 

FIBERLIGN Direct Mount Multi-Drop Bracket

• Select the catalog number from the table below when attaching multiple drop cable spans to a pole or structure with drop clamps (p-clamps), formed wire dead-ends with a 3/4" (19 mm) cable loop diameter, or formed wire dead-ends with an appropriate open style thimble.

 

Catalog Number Description
MDB106 Direct Mount Multi-Drop Bracket