EZ-WRAP® Side Tie
EZ WRAP Side Ties provide an improved method of securing conductor compared to clamp-top insulators or hand ties over Armor Rods. Manufactured of aluminum-covered steel, EZ-WRAP Side Ties secure conductors in the side groove of interchangeable headstyle insulators. They provide superior abrasion protection for the conductor under all types of motion, including low-frequency sway oscillation, high-frequency aeolian vibration, and galloping. The included tie tube provides an armoring layer that eliminates abrasion damage of the conductor and insulator caused by conductor motion. This extends the life of the electrical system and reduces maintenance.
-
Applicable to interchangeable headstyle insulators - C, F, and J-Neck
-
Accommodates conductors from 0.190" - 1.240" diameter
-
Pre-contoured Tie ensures a tight fit
-
Mitigates long-term issues caused by Radio Influence Voltage (RIV)
-
Accommodates line angles up to 10-degrees in the horizontal orientation and up to 40-degrees in the vertical orientation
-
Exceeds NESC requirements for unbalanced load
-
Reduces or eliminates abrasion caused by vibration
-
Ideal for severe weather applications and system hardening activities
-
Resiliency of the tie protects the conductor
-
Test reports available upon request
Product Information
EZ-WRAP Side Tie - Catalog Pages
Installation Instructions
Diameter Range |
Nominal Conductor Size1 | Units per Carton | C-Neck Insulators (Black) | F-Neck Insulators (Yellow) | Conductor Color Code | |||||
in | Catalog Number | Applied Length | Catalog Number | Applied Length | ||||||
Minimum | Maximum | in | in | |||||||
9/16" R. Groove2 | ||||||||||
0.190 | 0.215 | #6, 6/1; #4, 7W Comp. | 100 | EZSTC-270 | 21 | EZSTF-170 | 21 | Blue | ||
0.216 | 0.244 |
#4, 7W All Alum.; #4, 6/1, 7/1 Comp. |
100 | EZSTC-271 | 22 | EZSTF-171 | 22 | Brown | ||
0.245 | 0.277 |
#4, 6/1, 7/1; #4, 7W Alum. Alloy |
100 | EZSTC-272 | 23 | EZSTF-172 | 23 | Orange | ||
0.278 |
0.315 |
#3, 7W Alum. Alloy; #2, 7W All eAlum. |
100 | EZSTC-273 | 24 | EZSTF-173 | 24 | Purple | ||
0.316 | 0.357 |
#2, 6/1, 7/1; #2, 7W Alum. Alloy; #1, 6/1 ACSR |
100 | EZSTC-274 | 25 | EZSTF-174 | 25 | Red | ||
0.358 | 0.405 |
1/0, 7W All Alum.; 1/0, 6/1 ACSR; 1/0, 7W Alum. Alloy |
100 | EZSTC-275 | 23 | EZSTF-175 | 23 | Yellow | ||
0.406 | 0.459 |
2/0, 7W All Alum.; 2/0, 6/1 ACSR; 2/0, 7W Alum. Alloy |
100 | EZSTC-276 | 25 | EZSTF-176 | 25 | Blue | ||
0.460 | 0.520 |
3/0, 7W All Alum.; 3/0, 6/1 ACSR; 3/0, 7W Alum. Alloy |
100 | EZSTC-277 | 27 | EZSTF-177 | 27 | Orange | ||
0.521 | 0.588 |
4/0, 7W All Alum.; 4/0, 6/1 ACSR; 4/0, 7W Alum. Alloy |
100 | EZSTC-278 | 28 | EZSTF-178 | 28 | Red | ||
0.589 | 0.665 |
266.8, 37W All Alum.; 266.8, 18/1 |
100 | EZSTC-279 | 31 | EZSTF-179 | 31 | Purple | ||
0.666 | 0.755 |
336.4, 19W All Alum.; 336.4, 18/1; 397.5, 19W All Alum. |
100 | EZSTC-280 | 33 | EZSTF-180 | 34 | Brown | ||
0.756 | 0.858 |
477, 19W, 37W All Alum.; 477, 18/1 24/7, 26/7 |
50 | EZSTC-281 | 35 | EZSTF-181 | 26 | Red | ||
5/8" R. Groove2 | ||||||||||
0.859 | 0.968 |
556.5, 26/7; 636, 18/1; 700, 37W, 61W All Alum. |
50 | EZSTC-282 | 36 | EZSTF-182 | 37 | Blue | ||
11/16" R. Groove2 | ||||||||||
0.969 | 1.096 |
795, 37W All Alum.; 795, 61W All Alum.; 715.5, 24/7; 795, 54/7 |
50 | EZSTC-283 | 38 | EZSTF-183 | 39 | Green | ||
3/4" R. Groove2 | ||||||||||
1.097 | 1.240 |
954, 36/1, 54/7; 1033.5, 37W, 61W All Alum. |
50 | EZSTC-284 | 39 | EZSTF-184 | 40 | Yellow | ||
Right-hand lay standard NOTES: 1 Nominal Conductor Size indicates one or more of various conductors within each range. 2 For the succeeding ranges the insulator's side groove radius should be at least as large as shown above. |
Diameter Range |
Nominal Conductor Size1 | Units per Carton | J-Neck Insulators (Green) | Conductor Color Code | ||
in | Catalog Number | Applied Length | ||||
Minimum | Maximum | in | ||||
9/16" R. Groove2 | ||||||
0.190 | 0.215 | #6, 6/1; #4, 7W Comp. | 100 | EZSTJ-570 | 24 | Blue |
0.216 | 0.244 |
#4, 7W All Alum.; #4, 6/1, 7/1 Comp. |
100 | EZSTJ-571 | 25 | Brown |
0.245 | 0.277 |
#4, 6/1, 7/1; #4, 7W Alum. Alloy |
100 | EZSTJ-572 | 26 | Orange |
0.278 |
0.315 |
#3, 7W Alum. Alloy; #2, 7W All eAlum. |
100 | EZSTJ-573 | 27 | Purple |
0.316 | 0.357 |
#2, 6/1, 7/1; #2, 7W Alum. Alloy; #1, 6/1 ACSR |
100 | EZSTJ-574 | 28 | Red |
0.358 | 0.405 |
1/0, 7W All Alum.; 1/0, 6/1 ACSR; 1/0, 7W Alum. Alloy |
100 | EZSTJ-575 | 26 | Yellow |
0.406 | 0.459 |
2/0, 7W All Alum.; 2/0, 6/1 ACSR; 2/0, 7W Alum. Alloy |
100 | EZSTJ-576 | 28 | Blue |
0.460 | 0.520 |
3/0, 7W All Alum.; 3/0, 6/1 ACSR; 3/0, 7W Alum. Alloy |
100 | EZSTJ-577 | 30 | Orange |
0.521 | 0.588 |
4/0, 7W All Alum.; 4/0, 6/1 ACSR; 4/0, 7W Alum. Alloy |
100 | EZSTJ-578 | 31 | Red |
0.589 | 0.665 |
266.8, 37W All Alum.; 266.8, 18/1 |
100 | EZSTJ-579 | 34 | Purple |
5/8" R. Groove2 | ||||||
0.666 | 0.755 |
336.4, 19W All Alum.; 336.4, 18/1; 397.5, 19W All Alum. |
50 | EZSTJ-580 | 36 | Brown |
0.756 | 0.858 |
477, 19W, 37W All Alum.; 477, 18/1 24/7, 26/7 |
50 | EZSTJ-581 | 38 | Red |
0.859 | 0.968 |
556.5, 26/7; 636, 18/1; 700, 37W, 61W All Alum. |
50 | EZSTJ-582 | 39 | Blue |
0.969 | 1.096 |
795, 37W All Alum.; 795, 61W All Alum.; 715.5, 24/7; 795, 54/7 |
50 | EZSTJ-583 | 41 | Green |
1.097 | 1.240 |
954, 36/1, 54/7; 1033.5, 37W, 61W All Alum. |
50 | EZSTJ-584 | 42 | Yellow |
Right-hand lay standard NOTES: 1 Nominal Conductor Size indicates one or more of various conductors within each range. 2 For the succeeding ranges the insulator's side groove radius should be at least as large as shown above. |