FIBERLIGN® Dielectric Suspension for ADSS The FIBERLIGN® Dielectric Suspension is specifically designed for installation on ADSS cables and is.. Product #: FIBERLIGN Dielectric Suspension for ADSS

FIBERLIGN® Dielectric Suspension for ADSS


The FIBERLIGN® Dielectric Suspension is specifically designed for installation on ADSS cables and is different than FIBERLIGN® Suspension for OPGW. Due to the relatively fragile nature of the plastic jackets and nonmetallic strength members of ADSS, special care and features are incorporated into the design of the FIBERLIGN Dielectric Suspension.

  • Uses a combination of Structural Reinforcing Rods, Outer Rods, boltless housing and resilient cable inserts to reduce compression clamping and bending stresses on the cable and glass fibers.
  • Double layer of rods offers critical protection against tearing of the plastic jacket during unbalanced longitudinal loading of the cable while providing substantial holding strength.
  • Intended for long spans where suspension is desired regardless of span, where very high unbalanced longitudinal holding strengths are desired, or where very high vertical loads are expected.

 

Fiberlign Dielectric Suspension