The INSULIGN Tie Top Pin Type Polymer Insulators are designed to match the head, neck and mounting pin requirements of the applicable ANSI C29.5 and ANSI C29.6 insulator designs. “C” (2 -1/4" nominal), “F” (2-7/8" nominal) and "J" (3-1/2" nominal) neck sizes are available. By using ANSI head and neck dimensional standards, PLP metal or plastic formed wire ties install easily and will provide superior holding and electrical performance on PLP's INSULIGN Tie Top Polymer Insulators.

  • Tie top designs are ideal for use with PLP formed wire ties

  • Ideal for use with Tree Wire construction

  • Matched dielectric properties

  • Superior moisture and contamination shedding

  • UV-stabilized material

  • High-impact resistance

  • Lightweight design

  • ANSI-compliant head dimensions

  • Dramatically reduces abrasion damage to conductor

  • Ideal for jumpers and stinger wires

  • 100% recyclable

  • 1” or 1-3/8” pins

Product Information

INSULIGN Polymer Insulators Tie Top Pin Type - Catalog Pages

 

Installation Instructions

SP-3245 (INSULIGN Polymer Insulator Tie Top Pin Type)

Catalog Number ANSI Class* Application Mounting Pin Diameter Insulator Weight Units per Carton Weight per Carton
in  lb lb 
15 kV
IP-15-C  55-3  C Neck Tie Top  0.9  18   24 
 IP-15-F 55-4  F Neck Tie Top  1.2  24
25 kV
IP-25-F1  55-5  F Neck Tie Top  1.3  18 35
IP-25-F2  55-51  F Neck Tie Top 1.375  1.3  35.5 
IP-25-J1   56-11  J Neck Tie Top  37 
IP-25-J2  56-1  J Neck Tie Top  1.375  1.96  36 
 35 kV      
IP-35-F1  55-61   F Neck Tie Top  2.8 12 37 
IP-35-F2  55-71   F Neck Tie Top  1.375  2.8  36 
IP-35-J1  55-6  J Neck Tie Top 2.42  33 
IP-35-J2  55-7  J Neck Tie Top 1.375  2.46   32

NOTE: *Nominal ANSI C29.5 or C29.6 Class designation - These ANSI specifications are for Wet Processed Porcelain

NOTE: 1Meets the electrical requirements of the ANSI Class designation but a physical characteristic differs from the specification

Polymer Insulator Questions and Answers