Cleveland, Ohio – January 15, 2008 – Preformed Line Products (PLP) announces a new line of polymer insulators designed for use with PLP formed wire ties, plastic ties and hand tie wire. The new insulators are designed for use with overhead distribution lines with either bare or covered conductors.

PLP polymer insulators can be used for any application that calls for porcelain or polymer pin insulators, and are suitable for use with all types of jacketed or bare conductors. They have been designed to conform to applicable electrical and mechanical requirements of ANSI C29.5 pin insulator standards. Polymer insulators are made from a proprietary high-density polyethylene compound that includes UV and track resistance additives to ensure long service life. They are currently available in a full line of 15 kV and 35 kV Tie Top and Vise Top designs. A complete line of 25 kV designs will be available soon.

Polymer insulators offer a number of advantages over traditional porcelain insulators. Lighter weight makes them easier to install, high impact resistance renders them virtually indestructible, protecting against vandalism, and reduced abrasion at the insulator/conductor interface preserves the overall service life of the conductor. They also feature a unique descending skirt design and polyethylene surface, which provide moisture and contamination-shedding properties.

The polymer insulator line comes in two basic designs:

Tie Top Polymer Insulators:

• Matches most head and neck dimensional standards for ANSI C29.5, class 55-3,55-4, 55-5, 55-6 or 55-7 pin type insulators.
• Provides superior holding and electrical performance with PLP metal or plastic factory formed ties
  

Vise Top Polymer Insulators:

• Uses unique plastic clamp mechanism and black nylon torque bolts to secure the conductor.
• Insures proper torque is applied to mechanism.
• Clamp design provides quick installation.
  

For more information on the PLP Polymer Insulators or other PLP energy solutions, visit www.preformed.com/energy or call 440-461-5200.

Founded in 1947, Preformed Line Products (NASDAQ: PLPC) is an international designer and manufacturer of products and systems employed in the construction and maintenance of overhead and underground networks for energy, communications and broadband network companies. Headquartered in Cleveland, Ohio, the Company operates four domestic manufacturing centers, located in Rogers, Arkansas, Albuquerque, New Mexico, Albemarle, North Carolina and Asheville, North Carolina. PLP serves worldwide markets through international operations in Australia, Brazil, Canada, China, England, Mexico, New Zealand, Poland, South Africa, Spain and Thailand.

Cleveland, Ohio – November 26, 2007 – Designed for use with High Temperature Low Sag (HLTS) transmission conductors, THERMOLIGN hardware by Preformed Line Products (PLP) is helping the power utility industry harness more power. THERMOLIGN products were designed to be used with conductors operating at continuous temperatures up to 250 degrees Celsius and are currently available in three designs for various uses:

THERMOLIGN Suspension—for applications utilizing aluminum-based, ACSS, ACCR or ACCC, high temperature, transmission conductors operating up to 250 degrees Celsius.
- Multi-layer design for maximum mechanical performance and heat dissipation.
- Minimal heat transfer to mating hardware and insulators.
- Cushioned insert surrounding conductor protects against wind and ice.
- No detrimental heat transfer to the cushioned insert.

THERMOLIGN Dead-ends—for applications utilizing aluminum-based, ACSS or ACCR, high temperature, transmission conductors operating up to 250 degrees Celsius. - Multi-layer design for maximum mechanical performance and heat dissipation.
- Minimal heat transfer to mating hardware and insulators.
- No electrical connections.
- Simple to install.
- Protects conductor integrity.

THERMOLIGN Splice—for applications utilizing aluminum-based, ACSS or ACCR, high temperature, transmission conductors operating up to 250 degrees Celsius.
- No compression press and dies required.
- Minimal installation time.
- Simple two layer design.
- No need to separately expose and splice core.

For more information on the THERMOLIGN hardware or other PLP energy solutions, visit www.preformed.com/energy or call 440-461-5200.

Founded in 1947, Preformed Line Products (NASDAQ: PLPC) is an international designer and manufacturer of products and systems employed in the construction and maintenance of overhead and underground networks for energy, communications and broadband network companies. Headquartered in Cleveland, Ohio, the Company operates four domestic manufacturing centers, located in Rogers, Arkansas, Albuquerque, New Mexico, Albemarle, North Carolina and Asheville, North Carolina. PLP serves worldwide markets through international operations in Australia, Brazil, Canada, China, England, Mexico, New Zealand, Poland, South Africa, Spain and Thailand.

Cleveland, Ohio – June 11, 2007 – Preformed Line Products, a leader in fiber optic closures for more than 20 years, introduces the new COYOTE® Aerial Drop Closure. Designed to provide a superior protective environment for splicing fiber optic drop cable in Fiber-to-the-Premises (FTTP) aerial applications, the COYOTE Aerial Drop Closure allows for low count fiber splicing without the use of a splice tray.

As part of the COYOTE family, the closure is made of resilient, thermoplastic resin, designed to ensure performance in demanding FTTP outside plant environments. The main feature of the design is the new and innovative splicing platform, which eliminates the need for splice trays – lowering cost and reducing installation time. The closure kit components include everything needed to splice up to 12 fibers right out of the box. No special tools are required for installation, making setup quick and easy. The easy-to-use grommet sealing system further simplifies the installation process and provides superior protection from the elements.

In a standard configuration, the closure will accept two standard splicing platforms for a total capacity of up to 24 fibers. If required, the closure can accommodate even higher splice capacities by utilizing alternative splice platforms.

The universal mounting brackets included permit pole mounting with straps, strand mounting with strand clamps or suspension from "J" hooks secured to a pole.

For more information on the COYOTE Aerial Drop Closure or other PLP communications solutions, visit www.preformed.com/communications or call
440-461-5200.

Founded in 1947, Preformed Line Products (NASDAQ: PLPC) is an international designer and manufacturer of products and systems employed in the construction and maintenance of overhead and underground networks for energy, communications and broadband network companies. Headquartered in Cleveland, Ohio, the Company operates four domestic manufacturing centers, located in Rogers, Arkansas, Albuquerque, New Mexico, Albemarle, North Carolina and Asheville, North Carolina. PLP serves worldwide markets through international operations in Australia, Brazil, Canada, China, England, Mexico, New Zealand, South Africa, Spain and Thailand.

Cleveland, Ohio – September 27, 2005 - Preformed Line Products Company (PLP) introduces the new VORTX Vibration Damper to protect power conductor and other cables from the effects of wind-induced motion.

Aeolian vibration is a high frequency, low amplitude motion caused by smooth laminar winds passing across the line. When conductors or cables are exposed to this wind a phenomenon known as eddy or vortex shedding produces vibration in the line. Aeolian vibration can cause hardware breakdown, conductor fatigue, abrasion, and eventually, conductor failure.

The VORTX Vibration Damper improves on the decades old technology of the Stockbridge type damper. The original Stockbridge damper was effective at reducing vibration for two frequencies of conductor vibration. The VORTX Vibration Damper outperforms this through the use of a multi-response design that effectively reduces vibration over a wider range of imposing frequencies. This is accomplished by a unique design that matches weight sizes and messenger strand lengths to specific conductor/cable impedance and line operating conditions to achieve optimum performance.

Key features of the VORTX Vibration Damper include:

• Contoured Clamp – Aluminum alloy extrusions offer a precise fit to evenly capture the conductor.
• Clamp Profile – The clamp profile is configured to hang from the conductor or cable during installation in accordance with IEC standards. Hands are free to wrench tighten.
• Messenger Strand – Galvanized steel messenger strand provides maximum absorbsion of vibration energy.
• Weight – Galvanized modular iron weights hug the sides of the messenger strand not enclosing it, reducing the possibility of corrosion.
• Weight Attachment – Collet type or crimped attachment meet pull-off strength requirements in accordance with IEC standards without changing properties of adjoining messenger.

For more information on the VORTX Vibration Damper or other PLP products, visit www.preformed.com or call 440-461-5200.

Founded in 1947, Preformed Line Products (NASDAQ: PLPC) is an international designer and manufacturer of products and systems employed in the construction and maintenance of overhead and underground networks for energy, communications and broadband network companies.

Headquartered in Cleveland, Ohio, the Company operates three domestic manufacturing centers, located in Rogers, Arkansas; Albemarle, North Carolina and Asheville, North Carolina. Preformed serves worldwide markets through international operations in Australia, Brazil, Canada, China, England, Japan, Mexico, New Zealand, South Africa, Spain and Thailand.

# # #

Cleveland, Ohio – September 15, 2005 - Preformed Line Products (PLP) announces the COYOTE In-Line RUNT Closure, the latest addition to the COYOTE family of fiber optic enclosures for distribution and Fiber-to-the-Premise (FTTP) networks. The closure combines craft-friendly fiber management technology and a simplified installation process with a compact, durable enclosure that is ideal for aerial, pedestal and hand hole applications.

The COYOTE In-Line RUNT Closure can be configured using a selection of splice trays to accommodate various splicing methods and maximum capacities up to 144 splices. The built-in field-proven fiber management system in the closure base provides separate areas for routing and protecting tubes and bare fibers.

Like other members of the COYOTE family, In-Line RUNT Closure is made of impact-resistant thermoplastic resin. They feature easy-to-use end plates on each end. During installation, the technician simply snaps out the required end plate knockouts and seals the cables with either the PLPÆ Gel Sealant System or one of the standard available grommets.

The hinged cover is reversible, to accommodate different mounting arrangements, and re-enterable, requiring no additional parts or costly re-entry kits. The closure has been tested in accordance with Telecordia GR-771-CORE requirements. Quality COYOTE In-Line Runt Closures are manufactured in accordance with ISO 9001:2000 procedures.

Founded in 1947, Preformed Line Products (NASDAQ: PLPC) is an international designer and manufacturer of products and systems employed in the construction and maintenance of overhead and underground networks for energy, communications and broadband network companies.

Headquartered in Cleveland, Ohio, the Company operates three domestic manufacturing centers, located in Rogers, Arkansas; Albemarle, North Carolina and Asheville, North Carolina. Preformed serves worldwide markets through international operations in Australia, Brazil, Canada, China, England, Japan, Mexico, New Zealand, South Africa, Spain and Thailand.

# # #

Cleveland, Ohio – September 15, 2005 - Preformed Line Products (PLP) introduces the COYOTE Terminal Closure, the latest addition to the COYOTE family of fiber optic closures. It is available in two versions, single or dual chamber, to satisfy a wide variety of application requirements for splicing into distribution cable and making drop cable connections in Fiber-to-the-Premise (FTTP) applications.

The single chamber version features a single standard hinged cover incorporating up to nine hardened adapters. Once the pigtails from the adapters are spliced to the distribution cable, drop cable connections are simply made externally, without opening the hermetically sealed compartment.

The dual chamber version features dual hinged covers with separate compartments for distribution cable splicing and for drop cable installation. The drop chamber accommodates up to 16 drop cables. The dual chamber version can also be factory configured with up to 18 hardened adapters for quick and easy add/drop capability.

As part of the COYOTE family, the closures are made of resilient thermoplastic resin to ensure performance in demanding FTTP outside plant environments. The innovative, easy-to-use end plate design further simplifies the installation process. The technician simply removes the required knockouts and seals the cables with either the PLPÆ Gel Sealant System or one of the standard grommets offered. Closures are re-enterable without additional parts or costly re-entry kits. They are tested in accordance with Telecordia GR-771-CORE and TR-TSY-000949 requirements. Pigtails and feed-thru adaptors meet GR-326-CORE requirements.

Founded in 1947, Preformed Line Products (NASDAQ: PLPC) is an international designer and manufacturer of products and systems employed in the construction and maintenance of overhead and underground networks for energy, communications and broadband network companies.

Headquartered in Cleveland, Ohio, the Company operates three domestic manufacturing centers, located in Rogers, Arkansas; Albemarle, North Carolina and Asheville, North Carolina. Preformed serves worldwide markets through international operations in Australia, Brazil, Canada, China, England, Japan, Mexico, New Zealand, South Africa, Spain and Thailand.

*OptiTap is a trademark of Corning Cable System.

# # #

Cleveland, Ohio – September 15, 2005 - The new COYOTE Den Demarcation Enclosure from Preformed Line Products (PLP) consolidates and protects electronic equipment against physical damage and temperature extremes at the residential network demarcation point. Its large interior (15" x 13" x 7.5") accommodates a removable chassis for mounting Optical Network Units (ONU), Battery Back-up Units (BBU) and Power Supply Units (PSU). The Den is compatible with COYOTE fiber management hardware and splice trays, and has capacity for structured wiring and demarcation components.

The COYOTE Den Fiber-to-the Premises (FTTP) network interface is constructed of flame-retardant, impact and UV-resistant thermoplastic resin, with a double wall, foam insulation and a gasketed, lockable door. It is designed for use with a passive convection ventilating system (kits sold separately) that draws cool air from the home’s interior and vents heated air out to protect lower cost, non-hardened electronics from excessive heat and cold.

COYOTE Den Demarcation Enclosures are designed for installation during the rough-in framing stage of a home's exterior walls. They include pass-through openings to feed cables directly into the wall, protecting drop and premise wiring cables from physical damage. There are also provisions to mount an electrical box and standard receptacle (not included) to power battery back-up systems and other equipment. UL/CSA approved, the COYOTE Den also meets NEMA 4 hose down requirements for the most demanding environmental conditions.

Founded in 1947, Preformed Line Products (NASDAQ: PLPC) is an international designer and manufacturer of products and systems employed in the construction and maintenance of overhead and underground networks for energy, communications and broadband network companies.

Headquartered in Cleveland, Ohio, the Company operates three domestic manufacturing centers, located in Rogers, Arkansas; Albemarle, North Carolina and Asheville, North Carolina. Preformed serves worldwide markets through international operations in Australia, Brazil, Canada, China, England, Japan, Mexico, New Zealand, South Africa, Spain and Thailand.

# # #

Cleveland, Ohio - May 27, 2005 - New COYOTE Fiber Optic Splice Trays from Preformed Line Products (PLP) feature integrated fiber optic splitters that speed up and simplify installation. The pre-installed Fused Biconical Taper (FBT) Splitters are ready for immediate splicing, and the FBT process is impervious to moisture, for improved reliability in outside plant (OSP) applications.

These new COYOTE Fiber Optic Splice Trays install quickly into all COYOTE closures and feature the familiarity of the COYOTE Fiber Management System. With optical specifications developed around OSP network equipment requirements, they are available in a variety of split counts up to 1 x 16. Customized odd split ratios are available for different fiber drop lengths.

These rugged trays with integrated splitters provide the ultimate protection for splitter components and fibers. Locating the splitter and fibers in the same tray saves space, and colored bare fiber leads allow easy identification and faster splicing.

COYOTE Integrated FBT Splitters were built for qualification in accordance with Telecordia GR-1221 test criteria. When tested under these criteria, they outperform other types of splitter packages. They offer low insertion loss, back reflection, uniformity and are insensitive to operating wavelength for improved network performance.

Founded in 1947, Preformed Line Products (NASDAQ: PLPC) is an international designer and manufacturer of products and systems employed in the construction and maintenance of overhead and underground networks for energy, communications and broadband network companies. 

Headquartered in Cleveland, Ohio, the Company operates three domestic manufacturing centers, located in Rogers, Arkansas; Albemarle, North Carolina and Asheville, North Carolina. Preformed serves worldwide markets through international operations in Australia, Brazil, Canada, China, England, Japan, Mexico, New Zealand, South Africa, Spain and Thailand.

# # #

Cleveland, Ohio - May 7, 2004 - Preformed Line Products (PLP) announces the addition of the COYOTE® Dome Closure to its line of COYOTE fiber optic closures. The new closure incorporates a revolutionary re-enterable and re-usable end plate design that allows for easy user access to each cable entry separately, eliminating the possibility of disturbing any existing cables or fibers.

The COYOTE Dome Closure is available in two sizes, 6.5" X 22" and 6.5" X 17", to satisfy a variety of fiber optic distribution network requirements, including Fiber-to-the Premise (FTTP) applications. The end plate design makes for easier mid-sheath applications too. End plate grommets help users accommodate a number of smaller branch or drop cables. And, a new gel sealant system is easy to apply and reusable.

As a member of the PLP COYOTE family, the COYOTE Dome Closure utilizes the same splice trays and accessories as other closures in the series, including the COYOTE Splice Trays with integral fiber optic splitters providing in-built familiarity and unmatched compatibility. The COYOTE Dome Closure meets the requirements of Bellcore GR-771-Core for all aerial, buried and underground environments.

For more information on the COYOTE Dome Closure or other Preformed™ products for the communications industry, visit www.preformed.com or call 440-461-5200.

Founded in 1947, Preformed Line Products Company (Nasdaq: PLPC) is an international designer and manufacturer of products and systems employed in the construction and maintenance of overhead and underground networks for energy, communications and broadband network companies.

Preformed's world headquarters are in Cleveland, Ohio, and the Company operates three domestic manufacturing centers, located in Rogers, Arkansas; Albemarle, North Carolina; and Asheville, North Carolina. The Company serves its worldwide market through international operations in Australia, Brazil, Canada, China, England, Japan, Mexico, New Zealand, South Africa, Spain and Thailand.

Cleveland, Ohio - February 23, 2004 - Preformed Line Products (PLP) introduces the new Axcess Solutions Series of pre-terminated fiber cabinets to provide secure splice protection and interconnection for customer demarcation and remote site applications.

Customized to your exact specifications, the Axcess Solutions Series features COYOTE® Wall Mount and Rack Mount, Pre-Terminated Cabinets which are specifically designed to save up to 40% in installation labor costs. Fiber assemblies are 100% tested and labeled using ISO certified procedures, and each unit is ready for splicing right out of the box.

For maximum protection, all COYOTE Pre-Terminated Cabinets are made from rugged 16-gauge steel, protected with a durable powder-coat finish. Craft-friendly COYOTE Splice Trays and Adapter Modules are accommodated in any number of configurations including:

• Wall Mount Cabinets – Feature a lockable inner door to secure the splicing compartment doubles as a work shelf. Each cabinet may be ordered empty or pre-terminated. All cabinets include mounting hardware, tie-off brackets, grounding posts, grommets and hardware to secure splice trays.

• Rack Mount Cabinets – Come with universal mounting brackets to fit 19” or 23” racks or enclosures. Clear front door and access panels are removable for easy entry. Each cabinet may be ordered empty or pre-terminated. Smaller rack mount cabinets have keyhole slots for optional wall mounting.

For more information on the Axcess Solutions Series of Pre-Terminated Cabinets or other PLP products for the communications industry, visit www.preformed.com or call 440-461-5200.

Founded in 1947, Preformed Line Products (NASDAQ: PLPC) is an international designer and manufacturer of products and systems employed in the construction and maintenance of overhead and underground networks for energy, communications and broadband network companies.

Headquartered in Cleveland, Ohio, the Company operates three domestic manufacturing centers, located in Rogers, Arkansas, Albemarle, North Carolina, and Asheville, North Carolina. Preformed serves worldwide markets through international operations in Australia, Brazil, Canada, China, England, Japan, Mexico, New Zealand, South Africa, Spain and Thailand.

Cleveland, Ohio - September 25, 2003 - Preformed Line Products (PLP) introduces new COYOTE® Cable Demarcation Enclosures to provide rugged protection for cable lines and features that make installation quick and easy.

For maximum protection, the COYOTE Cable Demarcation Enclosure features impact-resistant thermoplastic resin molding and padlock tab for vandalism protection, UV inhibitors to protect from sun degradation and color shifts, and entrance and exit grommets to prevent insect entry.

Installation and storage are made easy with the many features of the COYOTE Cable Demarcation Enclosure. Its large interior accommodates common traps, filters, splitters, and amplifiers, is ideal for storing excess cable, and helps to maintain the proper bend radius for the cables; the wide profile allows for damage that may occur from the removal of other devices. Conduit ports with twist tie clamps and pin retainers provide fast and secure connections. In addition, a side-hinged door that stays in an open position or that may be removed and re-installed provides easy-access for cable technicians.

COYOTE Cable Demarcation Enclosures are available in two standard colors options, gray or beige, and two sizes, 12.8-inches by 10.5-inches by 2.8-inches or 12.8-inches by 10.5-inches by 4.2-inches.

For more information on the COYOTE Cable Demarcation Enclosures or other Preformed™ products for the communications industry, visit www.preformed.com or call 440-461-5200.

Founded in 1947, Preformed Line Products Company (Nasdaq: PLPC) is an international designer and manufacturer of products and systems employed in the construction and maintenance of overhead and underground networks for energy, communications and broadband network companies.

Preformed's world headquarters are in Cleveland, Ohio, and the Company operates three domestic manufacturing centers, located in Rogers, Arkansas, Albemarle, North Carolina, and Asheville, North Carolina. The Company serves its worldwide market through international operations in Australia, Brazil, Canada, China, England, Japan, Mexico, New Zealand, South Africa, Spain and Thailand.

Cleveland, Ohio - September 25, 2003 - Preformed Line Products (PLP) introduces the new COYOTE® Drop Cable Closure, a re-enterable, encapsulant-filled closure for splicing or repairing buried fiber optic drop cables. The unique closure system can accommodate fiber counts up to six fibers and includes a pre-encapsulated closure body, a closing clamp, a sealed splice tray assembly, and six 40 mm long heat shrink splice protectors.

The COYOTE Drop Cable Closure system makes assembly simple. Up to six heat-shrink fusion splice protectors can be secured and spliced in the splice block, and then sealed into the splice tray assembly. An integral band clamp on the splice tray provides conductivity between both the cable shields and cable restraint. The sealed tray is then placed in the closure body, filled with POLY-BEE™ Sealant, which provides a protective barrier around the sealed splice tray assembly. Finally, the entire closure is secured using the closing clamp.

Measuring 12 inches long by 3 inches high by 3.5 inches wide, the system accepts either dielectric or shielded fiber optic cables with an outside diameter of up to .5 inches (13 mm) and holds up to six fiber cables.

For more information on the COYOTE Drop Cable Closure or other Preformed™ products for the communications industry, visit www.preformed.com or call 440-461-5200.

Founded in 1947, Preformed Line Products Company (Nasdaq: PLPC) is an international designer and manufacturer of products and systems employed in the construction and maintenance of overhead and underground networks for energy, communications and broadband network companies.

Preformed's world headquarters are in Cleveland, Ohio, and the Company operates three domestic manufacturing centers, located in Rogers, Arkansas, Albemarle, North Carolina, and Asheville, North Carolina. The Company serves its worldwide market through international operations in Australia, Brazil, Canada, China, England, Japan, Mexico, New Zealand, South Africa, Spain and Thailand.

Cleveland, Ohio - September 25, 2003 - The newest addition to the Transmission Suspension product line from Preformed Line Products (PLP), the CUSHION-GRIP™ Suspension HT (High Temperature), is ideal for conductor operating temperatures up to 175 degrees Celsius. The unique one-piece design of the CUSHION-GRIP Suspension HT contains no loose parts, which allows for quick and easy installation, while providing the same performance of clamp and armor rods at a lower installed cost.

Preformed Line Products Company (Nasdaq: PLPC) offers a full line of Transmission Suspension products designed to provide support and reduce fatigue for conductors in a wide range of operating temperatures, including:

- THERMOLIGN™ Suspension – Designed to withstand temperatures up to 240 degrees Celsius, its multi-layer feature offers additional protection from bending stresses and maximum heat dissipation.

- ARMOR-GRIP® Suspension – More than 50 years after its introduction to the industry, it’s still considered to be the best suspension system available. Designed for operation up to 200 degrees Celsius, it combines specially formed rods, an elastomeric insert and a metal housing assembly.

- CUSHION-GRIP™ Suspension – With the same features as the CUSHION-GRIP™ Suspension HT, it is designed to accommodate temperatures up to 125 degrees Celsius. Cradling the cable in protective elastomer cushions, it reduces dynamic strain levels by 40 to 50 percent helping to extend conductor life.

Founded in 1947, Preformed Line Products is an international designer and manufacturer of products and systems employed in the construction and maintenance of overhead and underground networks for energy, communications and broadband network companies.

Preformed's world headquarters are in Cleveland, Ohio, and the Company operates three domestic manufacturing centers, located in Rogers, Arkansas, Albemarle, North Carolina, and Asheville, North Carolina. The Company serves its worldwide market through international operations in Australia, Brazil, Canada, China, England, Japan, Mexico, New Zealand, South Africa, Spain and Thailand.

Cleveland, Ohio - August 20, 2002 - The FIBERLIGN Aluminum Suspension (FASN) is designed to gently, but firmly support All-Dielectric Self-Supporting (ADSS) cable. The FASN features an Interlocking Hinge and Single-bolt clamping. The FASN system offers the short span capability of the FIBERLIGN ALUMINUM Support (FAS) with an additional degree of freedom that allows greater turning angles. Fittings and brackets are available for wood pole and concrete or metal structure applications.

Aluminum alloy keepers have an interlocking hinge for simple access and cable installation. Closing the keeper captures and secures the cushion inserts and ADSS cable. The keepers join together to form a clevis for attachment to the structure via an anchor shackle fitting or equivalent.
The Galvanized steel bolt and washer are captured with an elastomer o-ring. The galvanized steel lock nut has a stiff wire locking mechanism designed to engage with the thread of the mating bolt. The Cushion insert is made of a soft pliable dielectric material that gently grips the ADSS cable.

Founded in 1947, Preformed Line Products Company (Nasdaq: PLPC) is an international designer and manufacturer of products and systems employed in the construction and maintenance of overhead and underground networks for energy, communications and broadband network companies.

Preformed's world headquarters are in Cleveland, Ohio, and the Company operates three domestic manufacturing centers, located in Rogers, Arkansas; Albemarle, North Carolina; and Asheville, North Carolina. The Company serves its worldwide market through international operations in Australia, Brazil, Canada, China, England, Japan, Mexico, New Zealand, South Africa, Spain and Thailand.

Cleveland, Ohio - August 8, 2002 - Patented CUSHION-GRIP Suspensions are intended for use on all aluminum based conductors, and are designed to reduce the static and dynamic stresses at the support point, so that the conductor is protected against the effects of oscillations. The conductor is cushioned by field proven, integral elastomer inserts, which guard against abrasion, wear and fatigue.

The level of protection provided by the CUSHION-GRIP Suspensions is comparable to a bolted clamp over armor rods. This equates to a reduction in bending strain as high as 50% as compared to bare conductor in a bolted clamp. This reduction in bending strain can be directly related to an increase in overall conductor life.

Founded in 1947, Preformed Line Products Company (Nasdaq: PLPC) is an international designer and manufacturer of products and systems employed in the construction and maintenance of overhead and underground networks for energy, communications and broadband network companies.

Preformed's world headquarters are in Cleveland, Ohio, and the Company operates three domestic manufacturing centers, located in Rogers, Arkansas; Albemarle, North Carolina; and Asheville, North Carolina. The Company serves its worldwide market through international operations in Australia, Brazil, Canada, China, England, Japan, Mexico, New Zealand, South Africa, Spain and Thailand.

Cleveland, Ohio - August 13, 2002 - The FIBERLIGN Aluminum Support (FAS) is designed to gently, but firmly support All-Dielectric Self-Supporting (ADSS) cable. The FAS features the following; Integrated bolt or band mount design, Hinged keeper and base, Single-bolt clamping, and Stackabiity for multi-cable installations. For higher voltages (where track resistant ADSS cables are required), longer spans and/or higher loads, use either the Fiberlign Dielectric MIDspan Support/Suspension or the FIBERLIGN Dielectric Suspension. The aluminum alloy base and keeper have an interlocking hinge allowing easy access for pulling -in rope and ADSS cable. Closing the keeper captures the cable during stringing and subsequently secures the cable and cushion inserts for permanent installation.

The FAS was designed for short span applications where vertical loading does not exceed 1000# (4.4 kN). The maximum vertical load typically factors-in span length, cable OD, initial cable tension, ice and wind loading district (NESC) and multi-cable stacking.

Founded in 1947, Preformed Line Products Company (Nasdaq: PLPC) is an international designer and manufacturer of products and systems employed in the construction and maintenance of overhead and underground networks for energy, communications and broadband network companies.

Preformed's world headquarters are in Cleveland, Ohio, and the Company operates three domestic manufacturing centers, located in Rogers, Arkansas; Albemarle, North Carolina; and Asheville, North Carolina. The Company serves its worldwide market through international operations in Australia, Brazil, Canada, China, England, Japan, Mexico, New Zealand, South Africa, Spain and Thailand.

Cleveland, Ohio - September 25, 2003 -VARI-GRIP™ Dead-end, from Preformed Line Products (PLP), is specially designed for larger strand sizes, in Transmission, Antenna and Communications applications, as well as other types of guyed structures. VARI-GRIP Dead-End components, including the housing, U-Bolt, and hex nuts, allow for easy guy adjustment (up to 18”) during and after installation.

The VARI-GRIP Dead-end is performance matched according to strand size to achieve maximum rated holding strength (RHS) and material to ensure compatibility with the strand for the specified application. A corrosion preventive coating covers the hardware, rods, and fittings, providing an extra layer of protection.

Preformed Line Products Company (Nasdaq: PLPC) introduced its family of guying products in 1956, making them the most widely used guy strand dead-end products in the energy and communications industries. Other PLP guying products include:

- Big-Grip‰ dead-end – A one-piece, formed wire dead-end for terminating long-length guy strand on transmission towers.

- Guy Marker – Used for marking guy strands where anchoring devices are exposed to pedestrian or vehicular traffic. Available in PVC or polyethylene.

Founded in 1947, Preformed Line Products is an international designer and manufacturer of products and systems employed in the construction and maintenance of overhead and underground networks for energy, communications and broadband network companies.

Preformed's world headquarters are in Cleveland, Ohio, and the Company operates three domestic manufacturing centers, located in Rogers, Arkansas, Albemarle, North Carolina, and Asheville, North Carolina. The Company serves its worldwide market through international operations in Australia, Brazil, Canada, China, England, Japan, Mexico, New Zealand, South Africa, Spain and Thailand.