FIBERLIGN® ADSS Midspan Drop

The FIBERLIGN ADSS Midspan Drop allows drop cables to be redirected from midspan when direct attachment from the pole to the premise is obstructed or restricted for clearance reasons. It can be applied anywhere along the ADSS backbone cable as long as the cable is strong enough to endure the system side load requirements.

  • Flexible formed wire design allows the Midspan Drop to be applied anywhere along the cable span

  • Loop strength of 500 lb allows up to two drop cable attachments

  • UV-protected PVC thimble provides a curved interface that allows dead-ends to be directly attached

  • Structural reinforcing rod layer distributes loading and supports the cable bend radius to avoid signal attenuation

  • Provides proper loop support for FIBERLIGN ADSS Drop Cable Dead-Ends

Product Information

FIBERLIGN ADSS Midspan Drop - Catalog Pages

 

Installation Instructions

SP-3001 (FIBERLIGN ADSS Midspan Drop)

FIBERLIGN ADSS Midspan Drop

Catalog Number Cable Diameter Range Color Code  Length   
in mm in  mm  
3800005 0.350 - 0.399

8.9 - 10.1 

 White  27  0.69   
3800006 0.400 - 0.450 10.2 - 11.4 Red   27    0.69
3800007 0.451 - 0.509 11.5 - 12.9 Black 27    0.69  
3800008 0.510 - 0.575  13.0 - 14.6  Blue 27   0.69   
3800009  0.576 - 0.649  14.7 - 16.5   Orange 27    0.69  
3800010 0.650 - 0.730   16.6 - 18.5 Green   27  0.69   
3800011 0.731 - 0.820    18.6 - 20.8 Brown   27  0.69   
3800012 0.821 - 0.920 20.9 - 23.4   Yellow  27   0.69  
3800013  0.921 - 1.007 23.5 - 25.6  Purple  27    0.69  
00070253 PVC Thimble Only        
FIBERLIGN<sup>®</sup> ADSS Drop Cable Dead-End
FIBERLIGN® ADSS Drop Cable Dead-End