The unit uses the concept of a combination of structural reinforcing rods, outer rods, ‘bolted’ housing and resilient cable inserts to reduce compression clamping and bending stress on the cable and glass fibers. Effects of wind-induced cable motions such as Aeolian vibration, galloping and wind sway are also minimized.


The double layer of rods also offers critical protection against tearing of the plastic jacket during unbalanced longitudinal loading of the cable while providing substantial holding strength. This holding strength can vary according to cable brand, jacket type, operating temperature and other factors.


Long Span Series are recommended for ADSS spans up to 600m. Subject to ADSS cable design and operating conditions.


Line Angles:
Maximum recommended line angle for a single FIBERLIGN® Dielectric Suspension/
Support “Long Span” Series is 30°. For turning angles up to 60° the double suspension is
recommended, please contact PLP for support.

See Pages 3-7  Communication Catalogue